GoMining Calculator unofficial
‹ All articles
· 6 min read

Rewards explained

GoMining Reward Protection: why your reward shows 0

Some days your miner pays you nothing, and the rewards report calls it Reward Protection. It's not a bug and it's not a loss: it's the rule that stops your balance from ever going negative. Here's when it happens, how it works in Miner Wars, and how to check your own miner with today's numbers.

$54,821bitcoin price below which a 12 W/TH miner, with no discounts, starts having zero days
25%how far bitcoin can fall from $73,510 before that happens
$77,409the same line for a 20 W/TH miner with no discounts

What Reward Protection is, in one line

When your miner's maintenance for a day is higher than the bitcoin it mined that day, GoMining credits you zero and charges you zero, instead of leaving you with a negative balance.

Your miner earns bitcoin every day and pays maintenance (electricity plus service fee) out of it. Most days the reward is bigger and you keep the difference. On a day when it isn't, there are two ways a platform could handle it: send you a bill for the difference, or stop at zero. GoMining stops at zero. You never owe anything, and nothing is taken from your wallet to cover the gap.

It switches on automatically when you pay maintenance in GOMINING tokens, and it's designed above all for less efficient miners, according to GoMining's guide to payouts. The same guide says a day can only go negative if you switch the feature off yourself. If you pay maintenance in BTC, check that it's on in your reward settings.

The official documentation puts it in one sentence: "If expenses exceed income, the protection against negative rewards is activated" (GoMining docs, Rewards). Since the rewards report was redesigned on 1 October 2026, the app says so plainly on those days (official announcement).

What a zero day looks like

Same day, same network, same bitcoin price. Two 100 TH miners with no discounts, one at 12 W/TH and one at 20 W/TH:

100 TH · 12 W/TH

Mined today
$3.12
Maintenance
$2.33
You receive
$0.79
Covered by protection
$0.00

100 TH · 20 W/TH

Mined today
$3.12
Maintenance
$3.29
You receive
$0.00
Covered by protection
$0.17

Both machines mine exactly the same bitcoin: 100 TH is 100 TH. The difference is electricity: the 20 W/TH miner burns two-thirds more power for the same work. On today's numbers its maintenance is bigger than its reward, so Reward Protection holds the day at zero and covers the gap. Without it, that miner would end the day owing money.

When zero days start: one price

Reward and maintenance both grow with your TH, so the size of your miner cancels out. What decides whether you get zero days is a single bitcoin price, the same one the app shows on My miners as your break-even:

zero days start below: maintenance per TH per day ÷ bitcoin mined per TH per day

Above that price, every day pays you something. Below it, every day is a zero day. It depends only on your efficiency (W/TH), your discounts and the electricity rate of your data centre. The break-even article goes through the formula in detail.

Check your miner

Put in your miner's TH, its W/TH and your total maintenance discount (the rewards report shows it next to the service fee):

Mined per day—
Maintenance per day—
You receive—

Calculating…

Electricity is $0.05–0.07 per kWh depending on the data centre (official documentation). Figures in dollars with today's bitcoin price and network; GoMining pays in BTC.

Who has zero days today

What 100 TH receives in a day for the four efficiency levels you'll see most, without discounts and with every discount (29%):

W/TH No discount Every discount
29%
Zero days below
no discount
Calculating…

Per 100 TH per day, electricity at $0.05/kWh. "Zero day" means maintenance is higher than the reward and Reward Protection holds the day at $0. 29% is the most you can stack: 20% token, 6% VIP Elite and 3% service button. How each discount is earned.

The pattern is clear: efficient miners almost never see a zero day, and discounts push the line far down. A 20 W/TH miner with no discount is at zero today; the same miner with every discount still gets paid.

Reward Protection in Miner Wars

In Miner Wars the rule works per block (per round), not per day. The game rules say that when you pay maintenance in GOMINING and the fee for a round is higher than the reward for that round, the round can be settled at zero: no reward credited and no fee charged (Miner Wars rules, updated 3 November 2026, section 11). The documentation sums it up as "Reward protection floors each block at zero".

Three things are different from solo mining:

  • It's counted block by block. In one week you can have rounds that pay and rounds settled at zero. Each one is compared on its own.
  • The part above solo is charged at the league's average. When your Miner Wars rewards for the cycle go above what your miners would have mined solo, that extra part uses the average efficiency of the round and the league's average discount, not yours. So a farm that's less efficient than its league average can win blocks all week and still settle some at zero.
  • Pay in GOMINING and keep tokens until settlement. The rule is written for players who pay maintenance in GOMINING. The documentation also says the token balance pays block by block, so hold enough to cover every block until the Tuesday settlement ends; whatever isn't covered is paid in BTC at full price.

If you see a week with several rounds at zero, it isn't a mistake in your favour or against you: it's the protection doing its job. The Miner Wars strategy guide covers when the game pays more than solo, and when GoMining pays out has the exact settlement times.

How to have fewer zero days

The biggest lever

Better W/TH

Efficiency weighs more than any discount. Going from 20 to 15 W/TH moves your zero-day line by thousands of dollars. What an efficiency upgrade is worth.

Up to 29% off

Your discounts

Paying maintenance in GOMINING, your VIP level and the daily service button cut maintenance, and the zero-day line drops by the same percentage. Paying in GOMINING also switches Reward Protection on. The four discounts.

Works on its own

The network adjusts

When bitcoin falls, the world's least efficient machines switch off first, difficulty drops and each TH mines more. Zero days rarely last long for an efficient miner. How the network reacts.

Good to know

Reinvestment pauses

On a zero day there's nothing to reinvest, so your miner's power doesn't grow that day. It picks up again the next paying day. The reinvestment calculator.

Why it's good news

Reward Protection is the reason a GoMining miner can't turn into a debt. A miner you run at home with your own electricity bill doesn't have it: on a bad day you still pay the power company. On GoMining, the worst a day can do is pay you nothing, and your miner keeps all its TH for the days that pay. If you want to check that the paying days add up, here's how to verify GoMining's payouts yourself.

See your whole fleet
The calculator uses this same live data and gives you the net per day, the payback and the break-even for your exact setup.

In short

  • Reward Protection holds a day at zero when maintenance is higher than what your miner mined. No debt, nothing charged.
  • It's on automatically when you pay maintenance in GOMINING; a day only goes negative if you switch it off yourself.
  • It starts below one bitcoin price, the break-even the app shows on My miners. Today that's about $54,800 for 12 W/TH without discounts.
  • Your miner's size doesn't matter: only W/TH, discounts and electricity.
  • In Miner Wars it works per block, for players who pay maintenance in GOMINING, and the part above solo is charged at the league's average.
  • Fewer zero days: better W/TH, more discounts, and a network that switches off its worst machines first.

Read next: the maintenance fee, line by line, and why W/TH matters so much.

Bitcoin has dropped and you're not sure about starting? See why a falling market is the best time to start on GoMining: second-hand miners up to 32% cheaper.

Frequently asked questions

What is Reward Protection on GoMining?

It's the rule that stops your rewards from going negative. When a miner's maintenance for a day (electricity plus service fee) is higher than the bitcoin it mined, GoMining credits zero and charges zero for that day instead of leaving you with a debt.

Is Reward Protection on by default?

It switches on automatically when you pay maintenance in GOMINING tokens. GoMining's payouts guide says a day can only go negative if you switch the feature off yourself. If you pay maintenance in BTC, check that it's on in your reward settings in the app.

Why is my GoMining reward 0 today?

Almost always because maintenance was higher than what your miner mined that day, and Reward Protection held the day at zero. It happens when the bitcoin price is below your miner's break-even, which depends on its W/TH and your discounts. The rewards report says so on those days.

Do I owe GoMining money after a zero day?

No. The day is settled at zero: no reward credited and no fee charged. Nothing is carried over to the next day and nothing is taken from your wallet to cover the gap.

Does Reward Protection work in Miner Wars?

Yes, per block. The Miner Wars rules say that when you pay maintenance in GOMINING and the fee for a round is higher than its reward, the round can be settled at zero, with no reward and no fee. Keep enough GOMINING in your wallet until the Tuesday settlement ends.

Does a bigger miner have fewer zero days?

No. Reward and maintenance both grow with TH, so the size cancels out. Only efficiency (W/TH), your discounts and the electricity rate decide the bitcoin price below which zero days start.

How can I avoid zero days on GoMining?

Improve your miner's W/TH, which is the biggest lever, and stack discounts: paying maintenance in GOMINING (up to 20%), VIP level (up to 6%) and the daily service button (up to 3%). Each one lowers the bitcoin price at which zero days start.

If you decide to go in, get something for it

With the code 11jY4 you get +5% extra hashrate on your first miner purchase, up to a maximum of 25 TH, and a free month of VIP Platinum+ — a maintenance discount that lowers your zero-day line from day one.

The code does not travel on its own, and this is what goes wrong. If you tap through on a phone, the link drops you on the app download page, and no part of the address survives that jump. You install, you sign up… and the referral was never applied, with nothing to warn you. Copy it now and paste it into your profile —gear icon top right → Account details → friend's code— before you buy your first miner. Afterwards it can no longer be applied.

The three steps, with the full in-app path, are on the GoMining promo code page. If you want to check it is safe first, here is why GoMining is legit and not a scam, with payouts you can verify. This site is not affiliated with GoMining and does not give financial advice: the figures above are estimates built on assumptions you can change yourself, and they can be negative.

Next

Your miner's break-even price — the number on My miners, and how much room you have today.

The GoMining maintenance fee, explained — what you pay every day and how to lower it.

Unofficial website. Not affiliated with GoMining. Results are estimates based on public data and on assumptions you can change yourself: they are not a forecast and not a guarantee of income. This is not financial advice or a recommendation to buy. Bitcoin mining carries a risk of loss, including total loss of what you invest. Always verify the terms on the official platform before buying.